← All posts

Trimming and Turning Are Different Jobs

Trimming, changing direction and turning can all feel like steering. They are different jobs, and the difference is how much rail you put on.

intermediatetechnique

You’re riding across a wave and you shift your weight to make the board go where you want. From the outside, it all looks like one thing. In Real Surfing, it’s a few different jobs, taught in a deliberate order.

Trimming is light and subtle

Trimming isn’t carving. It isn’t a dramatic direction change. It’s slight adjustments to go a little higher or lower on the wave face.

The move is arms first. To trim higher, shift your arms over the rail toward the wave. To trim lower, shift over the rail away from the wave. Your weight follows onto that rail and the board responds.

Shifting both arms over one rail engages that rail. So a trim does use a rail. It just uses it lightly. Arms shift, weight follows, board responds. Subtle is the key word.

On a green wave, trimming is your default mode. Small adjustments to stay connected, with your eyes down the line.

Changing direction is deliberate

Trimming is subtle. Changing direction is deliberate. The difference is where you look.

Your eyes are the steering wheel. Turn your head toward where you want to go. Your arms shift to that side, your weight follows onto that rail, and the board angles and then steers that way. Inside rail takes you up the face. Outside rail takes you down it.

This is its own Line 2 skill, and it has real uses. Get back to the pocket when you’ve drifted. Exit the wave. Get around another surfer, by looking at the gap and not at them.

It’s also deliberately limited. No carving, no bottom turns, no top turns. Just steering with the eyes, arms, weight and rail.

Turning is a bigger commitment

Line 3 takes the rail further. In Line 2, trimming was your first taste of rail pressure. In Line 3, instead of subtle shifts, you lean. The board tilts onto its edge and grips the wave.

Rail engagement isn’t an on or off switch. More rail engaged means more power. Without it, turns skip along the surface.

Line 3 also gives you a vocabulary: compress, extend, lean, twist. A bottom turn is compress and lean. A top turn is extend and twist. Twisting is directed by where you look, which is the same idea you met when changing direction.

Why the order matters

By the time you reach Line 3, you’ve already done a lot of this. You can trim. You can make a deliberate direction change by looking where you want to go. The eyes, arms, weight and rail sequence is the foundation the bottom turn and top turn grow from.

So the Line 3 turn isn’t a brand new idea. It’s the same chain with more lean, and with compress, extend and twist added.

A mistake worth knowing

The common slip in Line 2 is carving when you meant to trim. Big, dramatic weight shifts instead of small ones. You lose your line, lose speed, or drop off the back.

The fix is to think subtle. Slight lean, slight pressure. Trimming is fine-tuning, not turning.

The takeaway

Trim: arms shift, weight follows, light rail. Change direction: eyes lead, deliberate. Turn: lean onto the rail and use the four movements.

Learn them in that order and each one has something to build on.